guides
Smoking Time and Temperature Chart for All Meats
Smoking time and temperature chart for beef, pork, poultry, fish, and more. Internal temp targets, smoke times, and tips for every cut.
Smoke most meats at 225–250°F and pull them when the internal temperature hits its target — with probe tenderness as the final test on tough cuts. Brisket and pork shoulder finish at 200–205°F and take 1–1.5 hours per pound; chicken and turkey are done at 165°F in 2–4 hours; pork ribs take 5–6 hours to probe-tender; salmon reaches 145°F in about 1.5 hours.
Smoking time and temperature chart: all major cuts at a glance
The table below is sorted by beginner-friendliness (easiest first). Smoker temperature assumes a stable 225–250°F on a pellet grill, offset smoker, or charcoal kettle. Times are estimates for an average-size cut from a cold start. The rating column reflects how forgiving each cut is for a first-time cook.
| Product | Best for | Rating | Notes | |
|---|---|---|---|---|
| Chicken Thighs or Wings | Finish temp: 165°F | ★★★★★ | 1.5–2 hrs at 250–275°F. Skin crisps better at higher heat. Probe the thickest part away from bone. | Check price |
| Salmon Fillet | Finish temp: 145°F | ★★★★★ | 1–2 hrs at 225°F. Watch closely after 90 min. Pull at 140°F and let carry-over finish to 145°F. | Check price |
| Pork Tenderloin | Finish temp: 145°F | ★★★★★ | 1.5–2 hrs at 225–250°F. Thin cut cooks fast — check at 90 min. Rest 10 min before slicing. | Check price |
| Whole Chicken | Finish temp: 165°F | ★★★★★ | 3–4 hrs at 250–275°F. Spatchcock for even cooking. Probe both breast and thigh to confirm. | Check price |
| Baby Back Ribs | Finish temp: Probe-tender | ★★★★☆ | 5–6 hrs at 225–250°F using 3-2-1 method. Done when probe slides between bones with no resistance. | Check price |
| Spare Ribs or St. Louis Cut | Finish temp: Probe-tender | ★★★★☆ | 6–8 hrs at 225–250°F. More fat than baby backs means they handle a longer cook without drying. | Check price |
| Pork Shoulder or Butt | Finish temp: 195–205°F | ★★★★☆ | 1.5–2 hrs per pound at 225–250°F. Very forgiving — extra time only helps. Rest 1 hr minimum. | Check price |
| Beef Chuck Roast | Finish temp: 195–205°F | ★★★★☆ | 1.5–2 hrs per pound at 225–250°F. Similar process to brisket — wrap at the stall, finish by probe feel. | Check price |
| Whole Turkey | Finish temp: 165°F | ★★★★☆ | 2.5–3 hrs for a 12–14 lb bird at 250°F. Brine overnight. Breast to 160°F, thigh to 165°F. | Check price |
| Brisket (Whole Packer) | Finish temp: 200–205°F | ★★★☆☆ | 1–1.5 hrs per pound at 225–250°F. 12–18 hrs for a 12 lb brisket. Wrap at stall. Rest 1–4 hrs. | Check price |
Beef: smoking times and temperatures
Brisket (whole packer, 12–16 lb): 225–250°F, 1–1.5 hours per pound, finish at 200–205°F internal in the flat. Wrap in pink butcher paper at the stall (around 165°F) to push through without over-steaming the bark. A 14-pound brisket takes 14–18 hours plus a mandatory 1–4-hour rest in a foil-wrapped cooler. The rest period determines the final texture as much as the cook itself.
For a full step-by-step technique, see the brisket smoking guide.
Beef chuck roast (3–5 lb): 225–250°F, 1.5–2 hours per pound, finish at 195–205°F. Chuck is the budget-friendly path to the same collagen conversion that makes brisket tender — it costs a third the price and is done in 6–9 hours. Probe in the thickest part; it is done when the probe enters with zero resistance, not when it hits a specific number.
Beef short ribs / plate ribs (3–4 lb per bone): 250°F, 8–10 hours, finish at 200–205°F. Plate ribs (also called dino ribs) are some of the most dramatic and rewarding cuts to smoke. The heavy fat content is extremely forgiving — extended cook time only improves them.
Tri-tip (2–3 lb): 225°F, 1.5–2 hours, pull at 125–130°F for medium-rare (carry-over brings it to 130–135°F), then sear over high heat for a crust. Tri-tip is a reverse-sear cut, not a collagen-conversion cut — do not cook it past 140°F or it becomes dry and crumbly.
Pork: smoking times and temperatures
Pork shoulder / Boston butt (6–10 lb): 225–250°F, 1.5–2 hours per pound, finish at 195–205°F. This is the most forgiving cut on the chart. If it reaches 210°F because of an unexpected temperature spike, it will still produce excellent pulled pork. Rest for at least one hour in a cooler. See how to smoke pork shoulder for the full method.
Baby back ribs: 225–250°F, 5–6 hours, done by probe feel between the bones. The classic 3-2-1 method (3 hours unwrapped, 2 hours wrapped in foil with a splash of apple juice, 1 hour unwrapped with sauce applied) works reliably for most backyard smokers. Remove the silverskin from the bone side before smoking. See how to smoke baby back ribs for step-by-step instructions.
Spare ribs / St. Louis cut: 225–250°F, 6–8 hours, done by probe feel. The same 3-2-1 method applies, often extended to 3-2-1.5 or 3-2-2 for large racks. These are fattier than baby backs and handle a longer cook without drying out.
Pork tenderloin (1–1.5 lb): 225–250°F, 1.5–2 hours, finish at 145°F and rest 10 minutes. The thinnest and fastest-cooking cut on this chart — start checking the internal temperature at 90 minutes to avoid overcooking.
Pork belly (skin-off, 5–8 lb): 225–250°F, 4–5 hours, finish at 165°F for firm slices or 200°F for a richer, more unctuous texture closer to pulled pork.
Poultry: smoking times and temperatures
Whole chicken (3.5–5 lb): 250–275°F, 3–4 hours, finish at 165°F in the thickest part of the thigh. Higher heat is needed to crisp the skin — chicken smoked at 225°F develops rubbery, unpleasant skin. Spatchcocking (removing the backbone and pressing the bird flat) reduces cook time to 2–2.5 hours and produces more even cooking throughout.
Chicken thighs (bone-in, skin-on): 250–275°F, 1.5–2 hours, finish at 165°F minimum. Bone-in thighs are extremely forgiving. Finishing at 175–185°F produces more tender, juicy meat than the minimum because collagen in the leg quarters has time to fully soften.
Chicken wings: 250–275°F, 1.5–2 hours, finish at 165°F. For crispy skin: smoke at 250°F for 90 minutes then crank the smoker to maximum (or finish on a hot grill) for 10 minutes per side.
Turkey (whole, 12–14 lb): 250°F, 2.5–3 hours, finish at 165°F throughout — 160°F in the breast (carry-over finishes it) and 165°F minimum in the thigh. Brine overnight in a simple 1-cup salt, 1-cup sugar, 1-gallon water solution for measurably juicier results. For a full holiday-ready method, see how to smoke turkey.
Fish and seafood: smoking times and temperatures
Salmon fillet (1–2 lb skin-on): 225°F, 1–2 hours, finish at 145°F. For a dry-brined hot-smoked result: cure the fish in a 3:1 sugar-to-salt dry brine for 4 hours, rinse thoroughly, then air-dry 30–60 minutes before smoking to form a pellicle. The pellicle is a tacky surface layer that lets smoke adhere more effectively and seals the surface against moisture loss. For the full method including brining ratios, see how to smoke salmon.
Trout (whole, butterflied): 225°F, 1.5–2 hours, finish at 145°F. Same approach as salmon. Apple wood or alder are the best pairings for delicate fish — hickory and mesquite are too heavy and can make fish taste acrid.
Shrimp: 225°F, 20–30 minutes, finish at 120°F internal (they firm up fast and overcook in minutes). Shrimp on a smoker work better as a quick flavoring step than a full smoke — 20 minutes of smoke exposure adds great flavor before a quick high-heat sear.
Lamb: smoking times and temperatures
Lamb shoulder (5–7 lb bone-in): 225–250°F, 1.5–2 hours per pound, finish at 195°F. Lamb shoulder has the same collagen-rich structure as pork shoulder and benefits from the same low-and-slow treatment. Season aggressively with rosemary, garlic, and coarse salt. The result shreds apart like pulled pork with a distinctly savory depth.
Leg of lamb (butterflied, 4–6 lb): 225–250°F, 1.5–2 hours total, finish at 130–135°F for medium-rare. Butterflied leg is a faster cook than shoulder and needs to be pulled earlier — it is a lean muscle cut, not a collagen-conversion cut, so overcooking makes it dry and grey.
What affects smoking time?
Time estimates in any smoking chart assume a stable smoker temperature, a cold but not frozen cut, and consistent outdoor conditions. These variables can extend or shorten times by 20–40%:
Smoker temperature stability. A smoker that runs hot (actual grate temp 25–50°F above set temp) produces faster cooks but risks drying out lean portions. Verify grate temperature with a dedicated probe thermometer — do not rely on the dome gauge, which typically reads 15–30°F above actual grate temperature.
Meat starting temperature. A brisket pulled from a 36°F refrigerator straight onto a smoker takes significantly longer than one that has sat at room temperature for 30 minutes. Cold-starting is safer from a food-safety standpoint; warm-starting is more predictable in timing.
Stall duration. The stall is not predictable in length — it can be 30 minutes or 4 hours for the same cut. Wrapping in pink butcher paper at 165°F reduces the stall impact on total cook time. See how to use a smoker for a full explanation of the stall and how different smoker types handle it.
Outdoor temperature and wind. A charcoal smoker on a cold winter day consumes fuel 30–50% faster and may struggle to hold temperature. Add extra fuel, use a windbreak, or wrap the smoker in a welding blanket on cold days. A pellet grill handles cold weather better than a charcoal kettle because the auger automatically compensates by feeding more pellets.
Altitude. At elevations above 3,500 feet, water boils at a lower temperature and evaporative cooling during the stall is more pronounced. Expect slightly longer stalls and plan an extra hour into your cook time.
The thermometer you need for any smoke
No smoking chart is useful without a reliable thermometer. The chart gives you targets; the thermometer tells you when you have hit them.
Best for Long smokes with multiple cuts
ThermoWorks Signals 4-Channel BBQ Thermometer
Four separate probe channels let you simultaneously track smoker grate temperature and up to three cuts, with Bluetooth and Wi-Fi connectivity for phone alerts when any probe hits its target. Best-in-class accuracy at plus or minus 1 degree F.
★★★★★ 4.9 · 2,104 reviews
Check current price on Amazon→If four channels is more than you need, the best wireless meat thermometers guide reviews two-probe options at multiple price points. For spot-checking doneness quickly without a leave-in probe, the best instant-read thermometers guide covers models that read in under two seconds.
FAQ
Frequently asked questions
What temperature should I smoke meat at?
How long does it take to smoke meat at 225°F?
Can you smoke meat too long?
What is the stall in smoking and how do I fix it?
What internal temperature is smoked brisket done at?
What is the minimum safe internal temperature for smoked meat?
Bottom line
The goal of this chart is to give you a starting point for planning, not a finish line. Internal temperature and probe tenderness determine when any smoked cut is done — not the clock. Set your smoker to 225–250°F, insert a leave-in probe before closing the lid, and use this chart when planning your start time. For the full technique on the most popular cuts, see: how to smoke brisket flat, how to smoke pork shoulder, how to smoke baby back ribs, and how to smoke salmon.