Outdoor Cooking

guides

How to Smoke a Ham: Step-by-Step Guide

Smoke a pre-cooked or fresh ham on any smoker. Temperatures, wood picks, glaze timing, and doneness tests for a perfect result every time.

Cole Whitaker Cole Whitaker

Smoke a pre-cooked ham at 225°F until it reaches 140°F internal — roughly 20 minutes per pound, or about 3 hours for a 7-pound half ham. For a fresh (raw, uncured) ham, smoke to 165°F internal, which takes 5 to 7 hours for a bone-in half. Score the surface, apply a brown sugar glaze in the final 30 minutes, and tent with foil for 15 minutes before slicing.

What type of ham should you buy for smoking?

Ham comes in three main forms, and each behaves differently on the smoker. Choosing the right one determines your cook time, the finished texture, and how much smoke flavor penetrates the meat.

Pre-cooked bone-in ham is the most popular choice for backyard smoking. The ham is already fully cooked during processing — you are reheating it to 140°F while layering on smoke and glaze. The bone conducts heat from the inside out, which produces more even cooking than a boneless cut of the same weight. A whole bone-in ham runs 12 to 18 pounds and serves 20 or more people. A half ham (butt or shank end) runs 6 to 9 pounds and is the standard size for most household cooks.

Spiral-cut pre-cooked ham is the most convenient option. The pre-cut slices let smoke penetrate deeply but also let moisture escape quickly. A spiral ham dries out in a long smoke if you are not careful — keep the smoke time short (under 2 hours for a 7-pound spiral) and glaze aggressively. Wrap in foil if the internal temperature climbs above 130°F before you are ready to glaze.

Fresh (uncured) bone-in ham is a raw pork leg with no smoke, salt, or cure applied. It requires the most work and the longest cook time, but the result is exceptional: pure pork flavor with full control over the smoke profile from start to finish. Fresh hams are less common at standard grocery stores but available at specialty butchers and whole-animal farms.

Product Best for Rating Notes
Pre-cooked bone-in half ham Standard backyard smoke, feeds 8 to 12 people ★★★★★ 6 to 9 lbs. Smoke to 140°F internal. Figure 20 min per pound at 225°F. Most forgiving option. Check price
Spiral-cut pre-cooked ham Fastest cook, deepest glaze penetration ★★★★★ 7 to 10 lbs. Keep smoke under 2 hours. Watch closely — pre-cut slices dry out faster than a whole ham. Check price
Fresh bone-in half ham Maximum smoke flavor, full creative control ★★★★★ 8 to 12 lbs. Must reach 165°F internal. Plan 25 min per pound. Less forgiving but best flavor ceiling. Check price

Equipment you need

Essential:

  • A smoker capable of holding 225°F steadily across a 3 to 7 hour cook
  • A dual-probe digital thermometer — one probe at grate level, one in the ham — so you never lift the lid to check temperature
  • A sharp carving knife for scoring and final slicing
  • Heavy-duty aluminum foil for tenting during the rest

Helpful:

  • A basting brush or silicone brush for applying glaze layers
  • A roasting rack or rib rack to hold the ham upright if your smoker has clearance
  • A disposable aluminum pan under the ham to catch drippings (useful for making a pan sauce)
  • Heat-resistant BBQ gloves for moving the ham off the smoker

Best for Monitoring ham and smoker temperature simultaneously without lifting the lid

Wireless Dual-Probe Meat Thermometer

One probe tracks ambient grate temperature, the second sits in the thickest part of the ham away from the bone. The receiver alerts you when the ham hits 130°F (glaze time) and again at 140°F (pull time). No need to open the smoker and release heat during the final hour of the cook.

★★★★★ 4.8 · 4,200 reviews

Check current price on Amazon→

Best for Delivering sweet, mild smoke flavor that complements ham without overpowering it

Apple and Cherry Smoking Wood Chunks

A 50/50 blend of apple and cherry wood chunks builds a balanced sweet smoke profile that pairs naturally with the salt and sweetness of a cured ham. Both woods burn cleanly at low and slow temperatures and produce a deep mahogany bark color. Three or four fist-sized chunks are enough for a full 3-hour smoke on a pre-cooked ham.

★★★★★ 4.7 · 6,800 reviews

Check current price on Amazon→

Step 1: Score and prep the ham

Score the surface. Use a sharp knife to cut a diamond pattern across the fat cap of the ham, slicing approximately 1/4 inch deep. Space the cuts about 1 inch apart. This serves two purposes: it helps the smoke penetrate beyond the surface layer, and it gives the glaze somewhere to pool and caramelize rather than running straight off the curved surface.

Optional: stud with whole cloves. Push one whole clove into the center of each diamond on the fat cap. Cloves add a warm, aromatic note that pairs exceptionally well with brown sugar glaze. Remove them before slicing — they are not pleasant to bite into.

Optional: inject the ham. For a bone-in ham over 10 pounds, injecting 1 cup of warm apple juice or a mixture of apple juice, brown sugar, and bourbon distributed throughout the thickest sections helps carry flavor into the interior. Use a large-barrel meat injector with a large-hole needle. Inject in a grid pattern every 2 inches, withdrawing the needle slowly while pushing the plunger.

Bring the ham to room temperature. Remove the ham from refrigeration 30 to 45 minutes before smoking. A cold ham straight from the refrigerator extends the cook time by 30 to 60 minutes and increases the risk of the exterior drying out before the interior reaches temperature.

A meat injector for flavor: meat injector for ham and turkey on Amazon

Step 2: Choose your wood

Ham is already salted, often sweetly cured, and carries its own intense flavor. Wood choice should complement, not compete.

Apple wood is the most reliable default. The smoke is mild and sweet, and it builds a beautiful warm-brown color on the exterior of the ham without any risk of going bitter over a 3-hour cook. Apple is the right choice if you are uncertain what your guests prefer.

Cherry wood produces a slightly deeper sweetness and adds a vivid reddish-brown color to the bark — striking against the white fat. Blending cherry with apple at a 50/50 ratio is one of the best combinations for smoked ham.

Maple wood pairs naturally with the brown sugar in most glazes. The wood itself carries subtle sweetness that reinforces rather than duplicates the glaze. Good choice for maple-glazed ham recipes.

Pecan adds nutty depth without the intensity of hickory. If you want a more pronounced smoke flavor without risking bitterness, pecan is the right move up from apple.

Hickory: use one chunk maximum for a pre-cooked ham, or skip it entirely. Hickory produces excellent smoke flavor, but it is aggressive — too much hickory on an already salty cured ham produces a harsh, astringent bite. If you want hickory, blend one hickory chunk with two or three apple chunks.

Avoid mesquite. Mesquite is too strong for a 3-hour or longer ham cook and produces a harsh, almost medicinal flavor on pork.

Step 3: Set up your smoker at 225°F

Preheat your smoker to 225°F. For charcoal and offset smokers, add 2 to 3 fist-sized wood chunks once the fire is established and the temperature is stable. For pellet grills, choose a fruit wood or hickory blend pellet. For gas grills adapted for smoking, set up a two-zone fire with the ham on the indirect side and a foil packet of soaked wood chips over the burner.

Place a drip pan under the ham to catch the sugary drippings from the scoring and glaze. Those drippings burn onto grate surfaces and are difficult to clean. They also make an excellent base for a finishing glaze or pan sauce.

Position the ham flat-side down, cut-side down, or on a rack depending on your smoker setup. The key is that the thickest part of the ham faces away from the hottest part of the smoker for even cooking.

A reliable pellet grill for ham smoking: pellet grill smoker for large cooks on Amazon

Step 4: Smoke to internal temperature

Pre-cooked ham: Smoke at 225°F until the internal temperature in the thickest section of meat (away from the bone) reads 140°F. Figure roughly 20 minutes per pound. A 7-pound half ham reaches 140°F in about 2.5 to 3 hours. A 12-pound whole ham takes 4 to 4.5 hours.

Fresh (uncured) ham: Smoke at 225°F until the internal temperature in the thickest section reaches 165°F. Figure roughly 25 minutes per pound. An 8-pound fresh bone-in half ham takes 5 to 6 hours.

Do not chase an exact time. A ham that starts cold, a smoker running 10 degrees below set temperature, or cold outdoor conditions can add 30 to 60 minutes. Monitor the probe thermometer and pull at temperature, not at a fixed time.

The internal probe should go into the thickest muscle section away from the bone. The bone conducts heat and will give a falsely high reading if the probe touches it.

Step 5: Glaze the ham

When the ham reaches 5 to 10 degrees below your target temperature, open the smoker and apply the first glaze coat with a basting brush. Apply a second coat 15 minutes later. If the ham needs more time to reach target temperature, apply a third coat in the final 15 minutes.

Classic brown sugar glaze: Combine 1 cup brown sugar, 2 tablespoons Dijon mustard, 2 tablespoons apple cider vinegar, and 1/4 teaspoon ground cloves. Warm in a saucepan over medium heat until the sugar dissolves, about 2 minutes. Apply warm.

Honey maple glaze: Combine 1/2 cup honey, 1/4 cup maple syrup, 2 tablespoons unsalted butter, 1 teaspoon ground cinnamon. Warm until combined and brush on.

The glaze caramelizes in the heat of the smoker and forms a lacquered, sticky exterior. Two thin coats produce a better set than one heavy coat — a heavy single application runs off the surface and pools in the drip pan rather than adhering to the meat.

Step 6: Rest and slice

When the ham reaches its target internal temperature, remove it from the smoker and tent loosely with foil. Let it rest for 15 to 20 minutes. The internal temperature will continue to rise 2 to 5 degrees during the rest, and the juices redistribute throughout the meat for cleaner slicing.

For a bone-in ham, slice perpendicular to the bone in 1/4-inch slices, then cut along the bone to release the slices. Work around the bone rather than trying to cut through it. A long, flexible carving knife makes the process significantly easier than a standard chef knife.

Common mistakes to avoid

Skipping the score. Without scoring, the smoke stays at the surface of the fat cap and the glaze runs off rather than adhering. Score every ham before it goes on the smoker.

Glazing too early. Brown sugar contains enough fructose to burn to carbon at sustained smoking temperatures above 225°F. Apply glaze only in the final 30 to 45 minutes. Earlier application produces a charred, bitter exterior crust.

Using too much hickory or mesquite. The sweet, salty cure in pre-cooked ham amplifies the intensity of strong smoking woods. A full 3-hour cook over hickory often produces an unpleasantly harsh result. Keep to apple, cherry, or maple for the full cook. If you want hickory, one chunk blended with fruit wood is enough.

Skipping the rest. Slicing immediately after pulling releases juices onto the cutting board instead of into the meat. Fifteen minutes of tented rest costs nothing and improves the moisture in every slice.

Checking temperature near the bone. The bone runs hotter than surrounding meat and will read 5 to 10 degrees above the actual meat temperature. Always probe the thickest muscle section, keeping the probe tip at least 1 inch from any bone.

FAQ

Frequently asked questions

How long does it take to smoke a ham?
A pre-cooked 7-pound half ham takes 2.5 to 3 hours at 225°F to reach 140°F internal. A 12-pound whole pre-cooked ham takes 4 to 4.5 hours. A fresh bone-in half ham (8 pounds) takes 5 to 6 hours to reach 165°F internal. Always monitor with a probe thermometer rather than relying strictly on time.
What temperature should smoked ham reach?
Pre-cooked ham is safe and ready to eat at 140°F internal — the USDA target for reheating pre-cooked pork. Fresh (raw, uncured) ham must reach 165°F internal for food safety. Going above 160°F on a pre-cooked ham is not harmful but will reduce moisture.
Can you smoke a spiral-cut ham?
Yes. A spiral-cut ham absorbs smoke quickly because the pre-cut slices expose more surface area. Keep the total smoke time under 2 hours and glaze aggressively. Wrap in foil at 130°F if the ham is browning faster than it is warming through — the foil slows surface drying without steaming off the glaze you have already applied.
What is the best wood for smoking ham?
Apple and cherry wood are the most reliable choices. Both are mild and sweet, complement the salty cure in pre-cooked ham, and produce a beautiful bark color without risk of bitterness over a 3-hour cook. Maple is an excellent alternative, especially for maple-glazed recipes. Hickory and mesquite can overpower ham — use sparingly or avoid entirely.
Do you smoke a ham covered or uncovered?
Smoke ham uncovered for the full cook so the surface dries slightly and accepts smoke and glaze efficiently. The only time to cover it is during the final rest — tent loosely with foil for 15 to 20 minutes after pulling to let juices redistribute before slicing.
Can I smoke a ham on a pellet grill?
Yes. A pellet grill is one of the best tools for smoking ham. Set the temperature to 225°F, choose a fruit wood or hickory blend pellet, and monitor with a wireless probe thermometer. The consistent temperature control of a pellet grill is ideal for the long, low smoke a fresh ham requires.

Bottom line

Smoking a ham is one of the most forgiving large-format cooks in outdoor cooking. A pre-cooked bone-in half ham requires no injection, no cure, and no active management beyond monitoring the probe temperature — set the smoker at 225°F, add three or four apple or cherry wood chunks, and check back in two and a half hours. The glaze goes on at 130°F internal. Pull at 140°F, tent for 15 minutes, and serve.

For the best smoke results, start with a bone-in half ham scored in a diamond pattern, choose apple or cherry wood, and resist applying the glaze until the final 30 to 45 minutes. The result is a caramelized, smoke-kissed exterior over juicy, deeply flavorful meat that improves on anything available from a grocery store deli counter.

For more low-and-slow pork smokes, read our guide to smoking a turkey breast, the baby back ribs 2-2-1 method guide, or how to smoke chuck roast. Looking to upgrade your setup? Browse our picks for the best smokers at every price point, the best BBQ rubs for pork, or the best pellet grills.